946 resultados para Eucalyptus urophylla


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The study analyzed the wood basic density effect in two Eucalyptus grandis x Eucalyptus urophylla hybrid clones (440 kg/m(3) e 508 kg/m(3)) on bleached pulp quality (fiber dimensions and physical-mechanical properties). The woods performance on pulping, bleaching and beating results were analyzed. The Kraft pulping was carried out in forced circulation digester in order to obtain 17 +/- 1 kappa number targets. The pulps were bleached to 90 +/- 1 using delignification oxygen and D0EOPD1 bleaching sequence. Bleached pulp of low basic density clone showed, significantly, lowest revolutions number in the PFI mill to reach tensile index of 70 N.m/g, low Schopper Riegler degree and generated sheets with higher values to bulk and opacity. These characteristics and properties allow concluding that bleached pulp of low basic density clone was the most indicated to produce printing and writing sheets. The bleached pulp of high basic density clone showed higher values of bulk and capillarity Klemm and lower water retention value when analyzed without beating. The bleached pulp of high basic density clone showed more favorable characteristics to the production of tissue papers.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The components used in the production of substrates influence directly the growth cycle, quality and consequently the cost of production of seedlings. In this experiment we studied the development, quality and cost of Eucalyptus grandis Hill ex Maiden x E. urophylla S. T. Blake, through sexual propagation using 12 compositions of substrate. The results showed that the pure substrates, with the exception of coconut fiber, did not present physical characteristics appropriate for the production from seedlings of eucalyptus in container, with the best results obtained for the substrates with a mixture 1:1 of carbonized rid of rice and coconut-fiber and a mixture 1:1 of vermiculite and coconut fiber, due to the best morphological characteristics and the possibility of reducing the production period which enables a reduction in the cost of final seedling.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study aimed to evaluate the adhesion ability of eucalyptus lumber from three tillage systems, using adhesives: resorcinol formaldehyde and two adhesives in water emulsion based on vinyl poly-acetate. The management systems were characterized by three strata, the stratum one (E1) characterized by wood from coppice and 70 months of age, the stratum two (E2) characterized by wood and retirement age of 166 months and stratum three (E3), also characterized by retirement at 70 months of age. The wood was derived from a random mixture of the first two sawn logs, each three feet from the base, which comprised three treatments on the adhesive used. We evaluated the shear strength by compression tests and the percentage of wood failure in the glue line. Based on the results obtained, it can be said that the adhesion had satisfactory performance with all the resins used, and the average values of shear strength of the glue line were shown to be equivalent to the shear strength of solid wood only for the samples which adhered with 'Wonderbond' adhesive and also provide higher values for wood failure (97.64%). The highest density present in the wood of the second stratum (E2) influenced only sticking with the resorcinol formaldehyde resin. For polyvinyl acetate (Cascorez 2590), shear values decreased in the third management condition (E3).

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Considering the increasing demand for seedlings of plants for aforestation and the scarcity of raw materials for the substrates used for plant growth, it is necessary to evaluate new components and formulations that ensure the quality of seedlings. In this experiment the development and quality of production of Eucalyptus urophylla x E. grandis seedlings was studied through vegetative propagation, as a function of nine compositions of substrate, produced from fine-grained vermiculite, carbonized rice chaff and coconut fiber in hard plastic tubes of 50 mL as containers. The physical properties of substrates and morphological development and the quality of the root system of seedlings were evaluated at 90 days after staking. The substrates with higher total porosity promotes better quality of the root system, which consequently results in cuttings with larger diameter, shoot and root dry weight and Dickson Quality Index. Other properties for the physical characteristics of substrates other than mentioned in literature can also be considered adequate.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Seedling taken from 2 species of Eucalyptus growing in Brazil were electrophoretically analysed at 14 isozyme loci representing 6 enzyme systems: alpha-EST, beta-EST, SKDH, IDH, MDH, and LAP. Genetic variability measures were determined using 11 putative isozyme loci. on average, 81.8% and 54.5% of the loci were found to be polymorphic by the criterion of 95% in E. urophylla and E. grandis, respectively. The mean number of alleles per loci was 3.0 in E. urophylla and 2.5 in E. grandis. Observed mean heterozygosity was 0.283 in E. urophylla and 0.166 in E. grandis. Levels of genetic diversity in these species were similar to those in other Eucalyptus species which have widespread distributions. The possible hybridization of E. urophylla with E. alba is also discussed.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Eucalyptus breeding is typically conducted by selection in open-pollinated progenies. As mating is controlled only on the female side of the cross, knowledge of outcrossing versus selling rates is essential for maintaining adequate levels of genetic variability for continuous gains. Outcrossing rate in an open-pollinated breeding population of Eucalyptus urophylla was estimated by two PCR-based dominant marker technologies, RAPD and AFLP, using 11 open-pollinated progeny arrays of 24 individuals. Estimated outcrossing rates indicate predominant outcrossing and suggest maintenance of adequate genetic variability within families. The multilcous outcrossing rate (t(m)) estimated from RAPD markers (0.93 +/- 0.027), although in the same range, was higher (alpha > 0.01) than the estimate based on AFLP (0.89 +/- 0.033). Both estimates were of similar magnitude to those estimated for natural populations using isozymes. The estimated Wright's fixation index was lower than expected based on t, possibly resulting from selection against selfed seedlings when sampling plants for the study. An empirical analysis suggests that 18 is the minimum number of dominant marker loci necessary to achieve robust estimates of t,. This study demonstrates the usefulness of dominant markers, both RAPD and AFLP, for estimating the outcrossing rate in breeding and natural populations of forest trees. We anticipate an increasing use of such PCR-based technologies in mating-system studies, in view of their high throughput and universality of the reagents, particularly for species where isozyme systems have not yet been optimized.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Calcium chloride concentrations from 0.0 to 12.12 mM were added to the culture medium and calcium content in calluses were determined directly by X-ray fluorescence spectrometry, a non-destructive method, allowing the processing of the same tissue for histological analysis. A multivariate statistical analysis (PCA - Principal Components Analysis) grouped the treatments into 5 blocks and indicated the most responsive group. Lack of calcium supply caused a complete absence of a morphogenic process and tissue collapse. An increase in calcium concentration gave higher total protein and sugar contents, an increase in peroxidase specific activity and changes in the histological characteristics. It was possible to verify that calcium stimulated globular somatic embryo formation at concentration of 6.62 mM.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A plantation of Eucalyptus urophylla, established in 1984 on a Quartzpsamment Soil, at Altinopolis, São Paulo State, presented in 1989 an medium increment of the cylindrical volume of the trees of 13.97 m 3/ha/year and also showed deficiency symptoms of potassium, calcium and magnesium. At 4.33 years after planting were applied two doses of nitrogen (0 and 10 g/tree of N), potassium (0 and 20 g/tree of K 2O) and of dolomitic lime (0 and 500 g/tree), combined in a randomized block design arranged in a factorial way (2 × 2 × 2), with four replications, in order to study the recuperation of the tree growth rate. Evaluations of the trees growth were performed at 4.33, 5.67, 6.75 and at 7.58 years when cutting the plantation was done. The soil fertility and leaf concentrations of N, K, Ca and Mg were analyzed before and after the application of the treatments. The accumulation and distribution of biomass and of these nutrients in the tree components and in the litter, and the economic studies referring to the volumes of wood were also evaluated 7.58 years after planting. Potassium fertilization increased the mass of potassium in stemwood, stembark, foliage, fruits and litter, but the increase was greater in foliage and in the stembark. Liming increased the mass of magnesium in stemwood, stembark, foliage and litter, but the increase was greater in the litter. There was no isolated effect of nitrogen fertilization. The growth rate of trees was recovered with the potassium application, which increased the mean annual increment (MAI) of cylindrical volume from 13.85 m 3/ha/year without fertilizer to 16.82 m 3/ha/year. At 7.58 years after planting, there was observed an effect of the N x K x dolomitic lime interaction in the wood production. In the absence of nitrogen and dolomitic lime, the application of potassium increased the real volume of 43% and there was a gain of US$ 86.79/ha.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Molecular markers have gradually replaced morphological markers in population studies. The advantages of molecular markers are the speed and precision of evaluations, mainly for long cycle cultures, where determinate traits can take years to manifest. The principle objectives of this research were to assess variability and genetic distances in four generations of Eucalyptus urophylla and provide data that help with the continued improvement of these materials. The populations can be found at the Experimental Forestry Sciences Station, Anhembi, SP, belonging to the College of Agriculture Luiz de Queiroz of São Paulo University. The initial base population was introduced by seeds collected in indonesia and designated P0 generation. The subsequent segregated generations, derivatives of recombination starting with open pollination, were designated P1, P2, and P3. One hundred and seventy four individual trees representing the four generations were analysed. The RAPD technique allowed the identification of 86 loci that were analysed with the Jaccard Coefficient, generating a genetic similarity matrix, permitting the estimation of genetic distances. The genetic distance of generation PO was 0.3338333, P1 was 0.336824, P2 was 0.40000, and P3 was 0.381093. In percentage terms the genetic distances between individuals grew in relation to base population, being 0.15% for generation P1, 18.93% for P2, and 13.31% for P3. This shows an increase in genetic variability with the advance of the program, despite the selective processes. From this came the belief that the initial base population was resulting from seed collection from isolated trees. These populations, although going through successive selections, had a high cross efficiency through satisfactory pollination, which then permitted genetic variation to increase, the outcome of effective recombination between individuals. Generations P2 and P3 gave a better perspective for the continuance of the improvement program due to the high number of different groups with standard genetic distances of 35%. The selections made between the diverse genetic groups allowed the efficient use of genetic variability evaluation.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Molecular markers have recently been incorporated into genetic improvement programs. They are already considered as powerful tools with several different uses, for instance the monitoring of genetic variability in tree populations. The main objectives of this study were to evaluate genetic variability in Eucalyptus urophylla progenies and together with silvicultural and botanical information, provide assistance to the improvement program. The Eucalypts population is located at the Experimental Forestry Sciences Station, Anhembi, SP, which belongs to the College of Agriculture Luiz de Queiroz. Sixty-nine progenies were analysed representing one individual by family in open pollinated Eucalyptus urophylla trees. The RAPD technique allowed the identification of 72 loci that were analysed using Jaccard's Coefficient generating a genetic similarity matrix to permit estimation of genetic distances. The results obtained showed genetic distance between individuals of 0.40 with 12 groups of genetic variability using a standardised distance of 40%. The progenies showed different bark patterns, allowing the establishment of bark groups. The groups formed based on genetic distances obtained using DNA analysis did not correspond to those based on bark pattern. Genetic selection was simulated in which silvicultural and genetic variability data were linked, thus avoiding excessive variability losses. The simulation of controlled crossings allowed the maximum genetic difference to be obtained linked with height and individual bark roughness.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Eucalyptus urophylla S. T. Blake is outstanding for valuable wood production potential, adaptation plasticity for different environmental conditions, and for tolerance to canker. However, genetic improvement of this specie in Brazil depends on the existence of genetic variability in the introduced populations. The objective of this study was to investigate the genetic variation and gains in quantitative traits in a population established in 1992 in Selvíria - MS. The progeny trial was established in a partially balanced, 8 x 8 lattice design, with 64 families, collected at Anhembi Experimental Station (IPEF/ESALQ/USP). Each plot was made up of eight trees planted in a 3 × 3 m spacing. Significant among families genetic variations were observed in diameter at breast height (DBH), bark type, stem form, and survival. Estimates of average family heritability were high for all traits, ranging from 0.50 to 0.85. The simulated selection by using multi-effect index showed that under a varying number of plants per family. This method is the most indicated to maximize genetic gains (7.24%) and the effective population size (69.3). These results are a useful support for the transformation of this test into a seedling seed orchard and to become a source of vegetative material to build a clonal seed orchard.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)